Original LCD Screen with Digitizer Full Assembly for Xiaomi Redmi K Pad

About the product
1. Original 8.8''  IPS LCD display + touch screen digitizer assembly replacement part for Xiaomi Redmi K Pad
2. Replace your broken or unusable item with a new one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the device.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means device apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in device. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

MATTERS NEED ATTENTION:

Once shipment arrived, please CHECK if the products in GOOD condition. If any damage of the package please do not accept the package and feedback to us.
Please remember that test your product before you install it. If not, it will be difficult to judge the responsibility if the LCD is damaged. please test the product first, and if there is a problem, communicate with us in time. If the buyer has already installed the product after feedback, we will not take any responsibility for the product.
If there is any problem, please send us a video, which shows the front and back side of the product and the process of testing. We can give you a solution as soon as possible.
Product no problem words, we recommend from the Internet to search for an installation guide, follow the steps to operate, and note.